Adding Users of Certified Network IP Addresses

To add users of certified IP addresses, press the F6 key from the Work with Certified Network IP Addresses screen (as shown in Specifying IP-Groups). The Add User of Certified Network Addresses screen appears:

​                 ​ Add User of Certified Network Addresses ​                                                                                                        ​ Type information, press Enter.                                                ​    ​ User  . . . . . . . . .​ ​           ​         ​ Name, generic*                   ​                                               ​ F4 for list                      ​  ​ Certified Network​                                                               ​ IP Address     ​  ​ Subnet Mask​      ​ Text​                                      ​  ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​              ​                ​  ​                ​  ​                               ​                                                                              ​      More...​                                                                                   ​ F3=Exit​  ​ F4=Prompt​  ​ F11=Alternate view​  ​ F12=Cancel ​                          ​                                                                                                                                                                  ​

The User field, near the top of the screen, is for the name of the user for whom you are specifying the addresses. This can be a single name or a Generic* name. Press the F4 key to select a name from a list of known users.

The body of the screen contains lines for the IP address ranges from which the user's connections do not need MFA. Each line includes these fields:

Certified Network IP Address

An IP address in the certified range.

Subnet Mask

A subnet mask indicating the range of addresses including that address.

Text

A text description of the range.